·

Machine structure:

PVC belt conveying、roller driving、frequency control

·

Motor:

It adopts 750W motor, WPS60 type 1:60 reducer, China famous brand 1HP inverter, frequency conversion stepless speed regulation, linear speed 1-6 m/min adjustable

·

Machine body and main structure

The racks are all made of 40×40 rectangular steel tubes.( Steel thickness is 1.2 mm) The support is made of Φ25mm galvanized roller, arranged at intervals of 250mm/branch; the legs are equipped with galvanized adjustable foot cups; the head guards are formed by 1.2mm cold plate bending. The fuselage is 2 meters long.

·

Conveying belt:

It adopts the imported high-quality green light-transporting special PVC belt from the Netherlands, with a thickness of 2mm, a width of 400mm and a total length of 22m

·

Parallel working board:

Opposite long strip type workbench (standing work), the specification is 11000×350×950mm, the support frame is made of 40×20 rectangular steel pipe (Steel thickness is 1.2 mm ), 30L angle iron support; the platen is made of high quality 18mm wood splint, and the face is covered with green fireproof board. , 30*80 aluminum sealing board; fastened on both sides of the fuselage. And install fluent aluminium track with yellow PU rollers on both sides.（1 meters two sides, total 48 pcs rollers,roller’s dia. 32 mm）The distance between working plate bottom and bottom ply wood is 80 mm.

·

Working plate:

The size of the working plate is: L350*300*15 MM thick bakelite plate, and each plate is punched with 12 holes. A total of 50 pcs bakelite plates are available on the entire line.

·

Lighting support:

The H-type lamp is set on the frame and is made of 40×20 square tube (steel thickness is 1.2 mm). Each 2m frame is connected to the body with 2000×50×25 galvanized wire trough to connect the power supply. The illumination is 18WLED fluorescent lamp integrated lamp. The line is arranged, and a total of 16 tubes are installed in one line