Aging Machine for LED Panel Light, Down Light, Flood Light, Street Light

Function: 

The LED multi-functional aging equipment is dedicated to the sophisticated inspection of LED finished lamps, and is experienced by the voltage zones of high voltage, medium voltage, normal pressure, low voltage, and impact roaming of LED lamps. Wide voltage regulation range. The use of the whole lamp is sophisticated and intuitive, and it is suitable for different types of LED lights. The power system adopts a variable frequency speed control system and is easy to operate.

Motor: 

It adopts 750W gear speed regulating motor, horizontal reducer WPA80 type 1:60 reducer, Sanjing brand 1HP inverter, frequency conversion stepless speed regulation, line speed 1-5M/min adjustable.

Machine Body and Structure: 

The frame is made of 40×40 rectangular steel pipe; the fuselage adopts special aluminum alloy profile for special aging line; the tail seal plate of the machine head adopts 1.2mm cold plate bending forming, the legs are equipped with galvanized adjustable foot cup, the body is 2 meters One part

Conveying Chains: 

The 6-point double-pitch double-hole chain produced by Shanghai Chain Factory is used.

Aging Trolley: 

The whole aging line is composed of about 20 small trolleys. It is divided into upper and lower layers to facilitate the aging of different products:

The dimensions of the trolley are: 550×width 440×height 400 (mm); double-layer structure, 3 PCT insulated epoxy board for upper and lower panels, 4 sets of 4-position audio fixtures for upper layer, and 3 sets of PCV water pipes. Aging panel lights; 4 sets of 4-position audio fixtures on the lower layer, 4 2G11 lamp holders, convenient for aging LED downlights/ceiling lights and 2G11 products. A 6A miniature circuit breaker is installed on each small trolley, and the bottom of the trolley is equipped with two copper conductors.