Fully automatic square wood multi-blade sawing can achieve twice the result with half the effort. Square wood multi-blade sawing can operate quickly, stably and safely. The main shaft of the machine has the advantages of excellent material, one-time through hole, conditioning, chromium plating, grinding, dynamic balance treatment, high stability, wear resistance and corrosion resistance. Bearing: imported brand, waterproof, anti-sharp heating equipment. Long service life and sensitive rotation
Four square wood multi-blade saw maintenance common sense, 1. At present, most of the mechanical components used in multi-blade saw are made of iron, such as improper storage, easy to rust, iron parts rust a layer of "skin", will shorten the service life. Therefore, iron parts should be removed in winter, cleaned, coated with anti-rust paint, stored in a ventilated, dry warehouse. 2. The feeding and discharging parts of the machine are made up of wood materials, which are easy to mildew after dampness. Therefore, before storage, it is necessary to wash, dry, coat Tung oil, and then put it in a ventilated and dry place. 3. If rubber parts are damped or oiled, they are prone to aging and cracking, and shorten their service life. Therefore, the triangular belt or flat tape on the rollers of log saws, square saws should be removed, hung on the walls or placed in a dry and ventilated place. During mechanical storage and parking, jacks or bricks are used to jack up the front and rear axles of the machinery so that the tires are off the ground and can not bear the load, but proper air pressure should be maintained. 4. The motor is the power supply device and the key component. If the motor is not used for a long time, it should be placed in a dry, ventilated and clean warehouse. If the motor is put together with agricultural products and chemical fertilizers, or on wet mud ground or easily wetted by rainwater, the motor will be damp, the internal insulation performance will decline, and it will easily cause short circuit, build-up iron, leakage of electricity, and even burn the coil.